- Make sure this fits by entering your model number.
- 1.8W solar panel makes higher water fountain and works efficiently.
- Easy to install the pump and use the fountain.
- Comes with different sprayer heads for squirt different water patterns.
- 10.8 long power cord for easily moving the solar panel and get the best sunlight.
- Please make sure the solar panel is not shadowed and keep the filter intake on the bottom clear of debris.
ITEM SPECIFICATION
●Solar panel power consumption: 9V 1.8W
●Power consumption: DC 4.5-10V
● Maximum water height: 23.6inch
● Maximum flow: 200L/H
● Maximum delivery head：59inch
● Cord length: 10.8inch ●Start: The water pump will not work without sunlight and It will starts working within 3 seconds once exposed to sunshine
●Working hours in the sun: 8:00A.M.-5:00P.M.
● Delay: ≤3s
● Size of the solar panel: 7*4.7*1inch
OPERATION GUIDE
1.Set up the pump nozzles and do not put the top spray head on.
2.Put the pump totally in the water with its nozzle over the water.(Water should be clean without too much debris)
3.Put solar panel under enough sunshine and be better to face directly to sun.
4.Let the pump work without spray head for seconds to let the air go out of the pump.
5.Put on the spray head, then the water flow will be high if solar panel exposed to enough sunlight.
CAUTION!!!
Under the 3 conditions, the solar pump might not work.
*Solar panel is in shadow.
*Solar panel is dirty.
*The pump outlet is clogged by debris in the water.
MAINTENANCE
1.Don’t make the pump work without water for a long time, or its lifespan will be shortened.
2.Always keep the solar panel dry and clean.
3.Clean the pump regularly especially the water outlet and spray caps to prevent it from getting stuck.
4.Change water frequently to keep water clean to avoid any dirt to impede the pump.